Initial power up of Discovery 2G Plus RS232 - Revision history

Editor at 10:14, 15 November 2025

2025-11-15T10:14:08Z

← Older revision		Revision as of 10:14, 15 November 2025
Line 79:		Line 79:
	\|}		\|}
	\| style="vertical-align:top; width:50%; text-align:center;" \|		\| style="vertical-align:top; width:50%; text-align:center;" \|
	[[File:Discovery_2G_RS232_Pin-out_page(1).jpg\|left\|550px]]		[[File:Discovery_2G_RS232_Pin-out_page(1).jpg\|left\|550px]]
			\|}
			== Quick SMS Configuration ==

			After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands of Discovery 2G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the Server and SMS.
			{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}
			{{Template:Precautions\|Precautions=}}

Editor: /* How to insert Micro-SIM card */

2025-11-14T11:25:44Z

How to insert Micro-SIM card

← Older revision		Revision as of 11:25, 14 November 2025
Line 19:		Line 19:

	For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.		For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.
			'''Internal Battery Disconnection Procedure''' To disconnect the internal battery, remove the device enclosure carefully and separate the PCB from the casing. The internal battery is connected to the PCB using a 2-pin connector. Gently unplug the connector from the port. After inserting or replacing the SIM card, reconnect the 2-pin connector securely before reassembling the enclosure.

	== 2x6 socket pinout ==		== 2x6 socket pinout ==

Editor at 06:13, 25 August 2025

2025-08-25T06:13:41Z

← Older revision		Revision as of 06:13, 25 August 2025
Line 1:		Line 1:

	[[File:Easy Banner.jpg\|link=Standard_Test_Reference\|alt=Click to test Transight devices\|center\|1500x1500px]]		[[File:Easy Banner.jpg\|link=Standard_Test_Reference\|alt=Click to test Transight devices\|center\|1500x1500px]]

Line 10:		Line 9:

	{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"		{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"
	\| [[File:DISC 116 ~~SIM 11~~.png\|450px]]\|\| [[File:~~Artboard 3~~.png\|~~300px~~]]		\| [[File:DISC 116 SIM1.png\|450px]] \|\| [[File:DISC 116 SIM2.png\|450px]]
	\|-		\|-
	\| '''Figure 1''' \|\| '''Figure 2'''		\| '''Figure 1''' \|\| '''Figure 2'''
	\|-		\|-
	\| [[File:~~Artboard 4~~.png\|~~300px~~]] \|\| [[File:~~Artboard 5~~.png\|~~300px~~]]		\| [[File:DISC 116 SIM3.png\|450px]] \|\| [[File:DISC 116 SIM4.png\|450px]]
	\|-		\|-
	\| '''Figure 3''' \|\| '''Figure 4'''		\| '''Figure 3''' \|\| '''Figure 4'''

Editor: /* How to insert Micro-SIM card */

2025-08-20T05:22:07Z

How to insert Micro-SIM card

← Older revision		Revision as of 05:22, 20 August 2025
Line 10:		Line 10:

	{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"		{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"
	\| [[File:DISC 116 SIM 1.png\|~~200px~~]]\|\| [[File:Artboard 3.png\|300px]]		\| [[File:DISC 116 SIM 11.png\|450px]]\|\| [[File:Artboard 3.png\|300px]]
	\|-		\|-
	\| '''Figure 1''' \|\| '''Figure 2'''		\| '''Figure 1''' \|\| '''Figure 2'''

Editor at 06:33, 19 August 2025

2025-08-19T06:33:31Z

← Older revision		Revision as of 06:33, 19 August 2025
Line 1:		Line 1:

	[[File:Easy Banner.jpg\|link=Standard_Test_Reference\|alt=Click to test Transight devices\|center\|1500x1500px]]		[[File:Easy Banner.jpg\|link=Standard_Test_Reference\|alt=Click to test Transight devices\|center\|1500x1500px]]

Line 9:		Line 10:

	{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"		{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"
	\| [[File:~~DISC116~~ SIM 1.png]] \|\| [[File:Artboard 3.png\|300px]]		\| [[File:DISC 116 SIM 1.png\|200px]]\|\| [[File:Artboard 3.png\|300px]]
	\|-		\|-
	\| '''Figure 1''' \|\| '''Figure 2'''		\| '''Figure 1''' \|\| '''Figure 2'''

Editor: /* How to insert Micro-SIM card */

2025-08-19T06:25:13Z

How to insert Micro-SIM card

← Older revision		Revision as of 06:25, 19 August 2025
Line 1:		Line 1:
	[[File:Easy Banner.jpg\|link=Standard_Test_Reference\|alt=Click to test Transight devices\|center\|1500x1500px]]		[[File:Easy Banner.jpg\|link=Standard_Test_Reference\|alt=Click to test Transight devices\|center\|1500x1500px]]

	== How to insert Micro-SIM card ==		== How to insert Micro-SIM card ==
	1. '''Remove the cover:''' Gently push the top and bottom cases of the '''Discovery 2G''' apart with both hands to open the device.<div>		1. '''Remove the cover:''' Gently push the top and bottom cases of the '''Discovery 2G''' apart with both hands to open the device.<div>
Line 8:		Line 9:

	{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"		{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"
	\| [[File:~~Artboard 2~~.png~~\|300px~~]] \|\| [[File:Artboard 3.png\|300px]]		\| [[File:DISC116 SIM 1.png]] \|\| [[File:Artboard 3.png\|300px]]
	\|-		\|-
	\| '''Figure 1''' \|\| '''Figure 2'''		\| '''Figure 1''' \|\| '''Figure 2'''
Line 18:		Line 19:

	For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.		For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.

	== 2x6 socket pinout ==		== 2x6 socket pinout ==

Editor at 09:35, 18 August 2025

2025-08-18T09:35:58Z

← Older revision		Revision as of 09:35, 18 August 2025
Line 1:		Line 1:
			[[File:Easy Banner.jpg\|link=Standard_Test_Reference\|alt=Click to test Transight devices\|center\|1500x1500px]]
	== How to insert Micro-SIM card ==		== How to insert Micro-SIM card ==
	1. '''Remove the cover:''' Gently push the top and bottom cases of the '''Discovery 2G''' apart with both hands to open the device.<div>		1. '''Remove the cover:''' Gently push the top and bottom cases of the '''Discovery 2G''' apart with both hands to open the device.<div>

Editor: /* 2x6 socket pinout */

2025-07-28T09:13:03Z

2x6 socket pinout

← Older revision		Revision as of 09:13, 28 July 2025
Line 21:		Line 21:
	{\| style="width:100%;"		{\| style="width:100%;"
	\| style="vertical-align:top; width:50%;" \|		\| style="vertical-align:top; width:50%;" \|

	{\| class="wikitable"		{\| class="wikitable"
	! style="background-color:#800020; white-space:nowrap; color:white;" \| Pin No.		! style="background-color:#800020; white-space:nowrap; color:white;" \| Pin No.

Editor at 09:42, 30 June 2025

2025-06-30T09:42:53Z

← Older revision		Revision as of 09:42, 30 June 2025
Line 2:		Line 2:
	1. '''Remove the cover:''' Gently push the top and bottom cases of the '''Discovery 2G''' apart with both hands to open the device.<div>		1. '''Remove the cover:''' Gently push the top and bottom cases of the '''Discovery 2G''' apart with both hands to open the device.<div>
	2. '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.<div>		2. '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.<div>
	3. '''~~Replace~~ cover:''' Securely attach the device cover back into place.<div>		3. '''Reattach the cover:''' Securely attach the device cover back into place.<div>
	4. Your device is now ready for connection.		4. Your device is now ready for connection.

Editor at 04:44, 25 June 2025

2025-06-25T04:44:51Z

← Older revision		Revision as of 04:44, 25 June 2025
Line 1:		Line 1:
	== How to insert Micro-SIM card ==		== How to insert Micro-SIM card ==
	* '''Remove the cover:''' Gently push the top and bottom cases of the '''Discovery 2G''' apart with both hands to open the device.		1. '''Remove the cover:''' Gently push the top and bottom cases of the '''Discovery 2G''' apart with both hands to open the device.<div>
	* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.		2. '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.<div>
	* '''Replace cover:''' Securely attach the device cover back into place.		3. '''Replace cover:''' Securely attach the device cover back into place.<div>
	* Your device is now ready for connection.		4. Your device is now ready for connection.


	{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"		{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"
	~~\| '''1''' \|\| '''2'''~~
	\|-
	\| [[File:Artboard 2.png\|300px]] \|\| [[File:Artboard 3.png\|300px]]		\| [[File:Artboard 2.png\|300px]] \|\| [[File:Artboard 3.png\|300px]]
	\|-		\|-
	\| '''3''' \|\| '''4'''		\| '''Figure 1''' \|\| '''Figure 2'''
	\|-		\|-
	\| [[File:Artboard 4.png\|300px]] \|\| [[File:Artboard 5.png\|300px]]		\| [[File:Artboard 4.png\|300px]] \|\| [[File:Artboard 5.png\|300px]]
			\|-
			\| '''Figure 3''' \|\| '''Figure 4'''
	\|}		\|}

← Older revision		Revision as of 09:13, 28 July 2025
Line 21:		Line 21:
	{\| style="width:100%;"		{\| style="width:100%;"
	\| style="vertical-align:top; width:50%;" \|		\| style="vertical-align:top; width:50%;" \|

	{\| class="wikitable"		{\| class="wikitable"
	! style="background-color:#800020; white-space:nowrap; color:white;" \| Pin No.		! style="background-color:#800020; white-space:nowrap; color:white;" \| Pin No.