Initial power up of Discovery 4G Advanced - Revision history

Editor: /* Quick SMS Configuration */

2025-12-05T05:06:34Z

Quick SMS Configuration

← Older revision		Revision as of 05:06, 5 December 2025
Line 82:		Line 82:
	== Quick SMS Configuration ==		== Quick SMS Configuration ==

	After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands of Discovery 2G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the ~~Server and~~ SMS.		After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]''', '''[[BLE_Configuration_app\|Blutooth Configuration Application]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands_of_Discovery_4G\|Commands of Discovery 4G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the server, SMS, or the BLE configurator Mobile App.
	{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}		{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}
	{{Template:Precautions\|Precautions=}}		{{Template:Precautions\|Precautions=}}

Editor at 10:16, 15 November 2025

2025-11-15T10:16:22Z

← Older revision		Revision as of 10:16, 15 November 2025
Line 77:		Line 77:
	\|CAN(L) \|\| CAN Low Pin		\|CAN(L) \|\| CAN Low Pin
	\|}		\|}

	\| style="vertical-align:top; width:50%; text-align:center;" \|		\| style="vertical-align:top; width:50%; text-align:center;" \|
	[[File:Discovery 4G Advanced Pin-out(1).jpg\|left\|400x5500px]]		[[File:Discovery 4G Advanced Pin-out(1).jpg\|left\|400x5500px]]
			\|}
			== Quick SMS Configuration ==

			After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands of Discovery 2G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the Server and SMS.
			{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}
			{{Template:Precautions\|Precautions=}}

Editor: /* 2x6 socket pinout */

2025-11-14T12:11:52Z

2x6 socket pinout

← Older revision		Revision as of 12:11, 14 November 2025
Line 27:		Line 27:
	! style="background-color:#800020; white-space:nowrap; color:white;" \| Cable Color		! style="background-color:#800020; white-space:nowrap; color:white;" \| Cable Color
	! style="background-color:#800020; white-space:nowrap; color:white;" \| Feature		! style="background-color:#800020; white-space:nowrap; color:white;" \| Feature
			! style="background-color:#800020; white-space:nowrap; color:white;" \| Description
	\|-		\|-
	\|1		\|1
	\|Red		\|Red
	\|9 to 90V		\|9 to 90V \|\|
	\|-		\|-
	\|2		\|2
	\|Green		\|Green
	\|Ignition		\|Ignition \|\| Input Max 12V
	\|-		\|-
	\|3		\|3
	\|Blue		\|Blue
	\|Analog In(AN) / Digital ~~In/Out~~(DI/DO)- 2		\| Analog Input (AN) / Digital Input (DI) / Digital Output (DO) - 2 \|\| AN Input: 0–12V<br>DI Input: 0–12V
	\|-		\|-
	\|4		\|4
	\|White		\|White
	\|Analog In(AN) / Digital ~~In/Out~~(DI/DO)- 3		\| Analog Input (AN) / Digital Input (DI) / Digital Output (DO) - 2 \|\| AN Input: 0–12V<br>DI Input: 0–12V
	\|-		\|-
	\|5		\|5
	\|Violet		\|Violet
	\|1-Wire Power		\|1-Wire Power \|\| Output 5V 30mA Max
	\|-		\|-
	\|6		\|6
	\|Grey		\|Grey
	\|CAN(H)		\|CAN(H) \|\| CAN High Pin
	\|-		\|-
	\|7		\|7
	\|Black		\|Black
	\|Ground		\|Ground \|\|
	\|-		\|-
	\|8		\|8
	\|Yellow		\|Yellow
	\|Analog In(AN) / Digital ~~In/Out~~(DI/DO)- 1		\| Analog Input (AN) / Digital Input (DI) / Digital Output (DO) - 2 \|\| AN Input: 0–12V<br>DI Input: 0–12V
	\|-		\|-
	\|9		\|9
	\|Orange		\|Orange
	\|RS485 (+)		\|RS485 (+) \|\|
	\|-		\|-
	\|10		\|10
	\|Pink		\|Pink
	\|RS485 (-)		\|RS485 (-) \|\|
	\|-		\|-
	\|11		\|11
	\|Sky Blue		\|Sky Blue
	\|1-Wire Sensor Data		\|1-Wire Sensor Data \|\|
	\|-		\|-
	\|12		\|12
	\|Brown		\|Brown
	\|CAN(L)		\|CAN(L) \|\| CAN Low Pin
	\|}		\|}

	\| style="vertical-align:top; width:50%; text-align:center;" \|		\| style="vertical-align:top; width:50%; text-align:center;" \|
	[[File:Discovery 4G Advanced Pin-out(1).jpg\|left\|400x5500px]]		[[File:Discovery 4G Advanced Pin-out(1).jpg\|left\|400x5500px]]

Editor: /* How to insert Micro-SIM card */

2025-11-14T11:26:26Z

How to insert Micro-SIM card

← Older revision		Revision as of 11:26, 14 November 2025
Line 17:		Line 17:

	For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.		For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.
			'''Internal Battery Disconnection Procedure''' To disconnect the internal battery, remove the device enclosure carefully and separate the PCB from the casing. The internal battery is connected to the PCB using a 2-pin connector. Gently unplug the connector from the port. After inserting or replacing the SIM card, reconnect the 2-pin connector securely before reassembling the enclosure.

	== 2x6 socket pinout ==		== 2x6 socket pinout ==

Editor at 06:38, 10 September 2025

2025-09-10T06:38:46Z

← Older revision		Revision as of 06:38, 10 September 2025
Line 4:		Line 4:
	* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.		* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.
	* '''Reattach the cover:''' Securely attach the device cover back into place.		* '''Reattach the cover:''' Securely attach the device cover back into place.

	* Your device is now ready for connection.		* Your device is now ready for connection.

			{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"
			\| [[File:DISC296 SIM1.png\|450px]] \|\| [[File:DISC296 SIM2.png\|450px]]
			\|-
			\| '''Figure 1''' \|\| '''Figure 2'''
			\|-
			\| [[File:DISC296 SIM3.png\|450px]] \|\| [[File:DISC296 SIM4.png\|450px]]
			\|-
			\| '''Figure 3''' \|\| '''Figure 4'''
			\|}

	For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.		For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.
Line 13:		Line 21:
	{\| style="width:100%;"		{\| style="width:100%;"
	\| style="vertical-align:top; width:50%;" \|		\| style="vertical-align:top; width:50%;" \|

	{\| class="wikitable"		{\| class="wikitable"
	! style="background-color:#800020; white-space:nowrap; color:white;" \| Pin No.		! style="background-color:#800020; white-space:nowrap; color:white;" \| Pin No.

Editor at 09:37, 18 August 2025

2025-08-18T09:37:20Z

← Older revision		Revision as of 09:37, 18 August 2025
Line 1:		Line 1:
			[[File:Easy Banner.jpg\|link=Standard_Test_Reference\|alt=Click to test Transight devices\|center\|1500x1500px]]
	== How to insert Micro-SIM card ==		== How to insert Micro-SIM card ==
	* '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 4G apart with both hands to open the device.		* '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 4G apart with both hands to open the device.

Editor at 09:44, 30 June 2025

2025-06-30T09:44:37Z

← Older revision		Revision as of 09:44, 30 June 2025
Line 2:		Line 2:
	* '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 4G apart with both hands to open the device.		* '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 4G apart with both hands to open the device.
	* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.		* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.
	* '''~~Replace~~ cover:''' Securely attach the device cover back into place.		* '''Reattach the cover:''' Securely attach the device cover back into place.

	* Your device is now ready for connection.		* Your device is now ready for connection.

Editor at 09:26, 20 June 2025

2025-06-20T09:26:47Z

← Older revision		Revision as of 09:26, 20 June 2025
Line 9:		Line 9:
	For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.		For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.
	== 2x6 socket pinout ==		== 2x6 socket pinout ==

	{\| style="width:100%;"		{\| style="width:100%;"
	\| style="vertical-align:top; width:50%;" \|		\| style="vertical-align:top; width:50%;" \|
	{\| class="wikitable"
	! Pin No. !! Cable Color !! Feature		{\| class="wikitable"
	\|-		! style="background-color:#800020; white-space:nowrap; color:white;" \| Pin No.
			! style="background-color:#800020; white-space:nowrap; color:white;" \| Cable Color
			! style="background-color:#800020; white-space:nowrap; color:white;" \| Feature
	\|-		\|-
	\|1		\|1

Editor at 11:00, 18 June 2025

2025-06-18T11:00:51Z

← Older revision		Revision as of 11:00, 18 June 2025
Line 65:		Line 65:

	\| style="vertical-align:top; width:50%; text-align:center;" \|		\| style="vertical-align:top; width:50%; text-align:center;" \|
	[[File:Discovery 4G Advanced Pin-out(1).jpg~~\|thumb~~\|left\|400x5500px]]		[[File:Discovery 4G Advanced Pin-out(1).jpg\|left\|400x5500px]]

Editor at 09:19, 17 June 2025

2025-06-17T09:19:35Z

← Older revision		Revision as of 09:19, 17 June 2025
Line 65:		Line 65:

	\| style="vertical-align:top; width:50%; text-align:center;" \|		\| style="vertical-align:top; width:50%; text-align:center;" \|
	[[File:Discovery 4G Advanced Pin-out(1).jpg\|thumb\|left\|~~500px~~]]		[[File:Discovery 4G Advanced Pin-out(1).jpg\|thumb\|left\|400x5500px]]

← Older revision		Revision as of 10:16, 15 November 2025
Line 77:		Line 77:
	\|CAN(L) \|\| CAN Low Pin		\|CAN(L) \|\| CAN Low Pin
	\|}		\|}

	\| style="vertical-align:top; width:50%; text-align:center;" \|		\| style="vertical-align:top; width:50%; text-align:center;" \|
	[[File:Discovery 4G Advanced Pin-out(1).jpg\|left\|400x5500px]]		[[File:Discovery 4G Advanced Pin-out(1).jpg\|left\|400x5500px]]
			\|}
			== Quick SMS Configuration ==

			After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands of Discovery 2G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the Server and SMS.
			{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}
			{{Template:Precautions\|Precautions=}}