Initial power up of Discovery 4G Plus - Revision history

Editor: /* Quick SMS Configuration */

2025-12-05T05:06:16Z

Quick SMS Configuration

← Older revision		Revision as of 05:06, 5 December 2025
Line 60:		Line 60:
	== Quick SMS Configuration ==		== Quick SMS Configuration ==

	After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]''', '''[[BLE_Configuration_app\|Blutooth Configuration Application]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands_of_Discovery_4G\|Commands of Discovery 4G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the ~~Server and~~ SMS.		After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]''', '''[[BLE_Configuration_app\|Blutooth Configuration Application]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands_of_Discovery_4G\|Commands of Discovery 4G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the server, SMS, or the BLE configurator Mobile App.
	{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}		{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}
	{{Template:Precautions\|Precautions=}}		{{Template:Precautions\|Precautions=}}

Editor: /* Quick SMS Configuration */

2025-12-05T04:38:19Z

Quick SMS Configuration

← Older revision		Revision as of 04:38, 5 December 2025
Line 60:		Line 60:
	== Quick SMS Configuration ==		== Quick SMS Configuration ==

	After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands of Discovery 2G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the Server and SMS.		After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]''', '''[[BLE_Configuration_app\|Blutooth Configuration Application]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands_of_Discovery_4G\|Commands of Discovery 4G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the Server and SMS.
	{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}		{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}
	{{Template:Precautions\|Precautions=}}		{{Template:Precautions\|Precautions=}}

Editor at 10:15, 15 November 2025

2025-11-15T10:15:36Z

← Older revision		Revision as of 10:15, 15 November 2025
Line 54:		Line 54:
	\| 12 \|\| N/A \|\| \|\|		\| 12 \|\| N/A \|\| \|\|
	\|}		\|}


	\| style="vertical-align:top; text-align:center; width:50%;" \|		\| style="vertical-align:top; text-align:center; width:50%;" \|
	[[File:Discovery 4G Plus Pin-out(1).jpg\|450px]]		[[File:Discovery 4G Plus Pin-out(1).jpg\|450px]]
	\|}		\|}

			== Quick SMS Configuration ==

			After powering up the device, verify that the LED indicators display the correct status. '''[[LED Behaviour description\|Discovery LED Status]]''' Quickly set up the device by sending the required SMS commands from the SMS Configuration page.<br> '''[[SMS Configuration]]'''<br> Once SMS configuration is completed successfully, configure the device to the server using the appropriate commands '''[[Commands of Discovery 2G]]'''. After configuration, the Discovery device will synchronize its time and begin sending records to the configured server. The reporting intervals and default I/O elements can be modified using commands sent through the Server and SMS.
			{{Template:Mounting_Recommendations\|Mounting_Recommendations=}}
			{{Template:Precautions\|Precautions=}}

Editor: /* 2x6 socket pinout */

2025-11-15T04:17:28Z

2x6 socket pinout

← Older revision		Revision as of 04:17, 15 November 2025
Line 57:		Line 57:

	\| style="vertical-align:top; text-align:center; width:50%;" \|		\| style="vertical-align:top; text-align:center; width:50%;" \|
	[[File:Discovery 4G Plus Pin-out(1).jpg\|~~550px~~]]		[[File:Discovery 4G Plus Pin-out(1).jpg\|450px]]
	\|}		\|}

Editor: /* 2x6 socket pinout */

2025-11-14T11:53:23Z

2x6 socket pinout

← Older revision		Revision as of 11:53, 14 November 2025
Line 24:		Line 24:
	\| style="vertical-align:top; width:50%;" \|		\| style="vertical-align:top; width:50%;" \|

	{\| class="wikitable"		{\| class="wikitable" style="width:100%; text-align:left;"
	! style="background-color:#800020; white-space:nowrap~~; color:white~~;" \| Pin No.		! style="background-color:#800020; color:white; white-space:nowrap;" \| Pin No.
	! style="background-color:#800020; white-space:nowrap~~; color:white~~;" \| Cable Color		! style="background-color:#800020; color:white; white-space:nowrap;" \| Cable Color
	! style="background-color:#800020; white-space:nowrap; color:white;" \| ~~Feature~~		! style="background-color:#800020; color:white; white-space:nowrap;" \| Feature
			! style="background-color:#800020; color:white; white-space:nowrap;" \| Description
	\|-		\|-
	\|1 \|\| Red \|\| +9 to 90V		\| 1 \|\| Red \|\| +9 to 90V \|\|
	\|-		\|-
	\|2 \|\| Green \|\| Ignition - Non EV		\| 2 \|\| Green \|\| Ignition - Non EV \|\| Input max 12V
	\|-		\|-
	\|3 \|\| Blue \|\| ~~Analog Input (~~AN) / ~~Digital Input (~~DI)- 2		\| 3 \|\| Blue \|\| AN / DI / DO - 2 \|\| AN Input: 0–12V<br>DI Input: 0–12V
	\|-		\|-
	\|4 \|\| White \|\| ~~Digital Output (~~DO)- 1		\| 4 \|\| White \|\| DO-1 / AN / DI / DO-3 \|\| AN Input: 0–12V<br>DI Input: 0–12V
	\|-		\|-
	\|5 \|\| Violet \|\| 1-Wire Power		\| 5 \|\| Violet \|\| 1-Wire Power \|\| Output: 5V, 30mA max
	\|-		\|-
	\|6 \|\| N/A \|\|		\| 6 \|\| N/A \|\| \|\|
	\|-		\|-
	\|7 \|\| Black \|\| Ground		\| 7 \|\| Black \|\| Ground \|\|
	\|-		\|-
	\|8 \|\| Yellow \|\| ~~Analog Input (~~AN)/ ~~Digital Input (~~DI)- 1		\| 8 \|\| Yellow \|\| AN / DI / DO - 1 \|\| AN Input: 0–12V<br>DI Input: 0–12V
	\|-		\|-
	\|9 \|\| Orange \|\| RS485 (+)		\| 9 \|\| Orange \|\| RS485 (+) \|\|
	\|-		\|-
	\|10 \|\| Pink \|\| RS485 (-)		\| 10 \|\| Pink \|\| RS485 (-) \|\|
	\|-		\|-
	\|11 \|\| Sky Blue \|\| 1-Wire Sensor Data		\| 11 \|\| Sky Blue \|\| 1-Wire Sensor Data \|\|
	\|-		\|-
	\|12 \|\| N/A \|\|		\| 12 \|\| N/A \|\| \|\|
	\|}		\|}


	\| style="vertical-align:top; text-align:center; width:50%;" \|		\| style="vertical-align:top; text-align:center; width:50%;" \|
	[[File:Discovery 4G Plus Pin-out(1).jpg\|550px]]		[[File:Discovery 4G Plus Pin-out(1).jpg\|550px]]
	\|}		\|}

Editor: /* How to insert Micro-SIM card */

2025-11-14T11:24:45Z

How to insert Micro-SIM card

← Older revision		Revision as of 11:24, 14 November 2025
Line 17:		Line 17:

	For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.		For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.
			'''Internal Battery Disconnection Procedure''' To disconnect the internal battery, remove the device enclosure carefully and separate the PCB from the casing. The internal battery is connected to the PCB using a 2-pin connector. Gently unplug the connector from the port. After inserting or replacing the SIM card, reconnect the 2-pin connector securely before reassembling the enclosure.

	== 2x6 socket pinout ==		== 2x6 socket pinout ==

Editor at 06:21, 10 September 2025

2025-09-10T06:21:21Z

← Older revision		Revision as of 06:21, 10 September 2025
Line 4:		Line 4:
	* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.		* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.
	* '''Reattach the cover:''' Securely attach the device cover back into place.		* '''Reattach the cover:''' Securely attach the device cover back into place.

	* Your device is now ready for connection.		* Your device is now ready for connection.

			{\| style="border-spacing:0; padding:0; margin:0; text-align:center;"
			\| [[File:DISC226 SIM1.png\|450px]] \|\| [[File:DISC226 SIM2.png\|450px]]
			\|-
			\| '''Figure 1''' \|\| '''Figure 2'''
			\|-
			\| [[File:DISC226 SIM3.png\|450px]] \|\| [[File:DISC226 SIM4.png\|450px]]
			\|-
			\| '''Figure 3''' \|\| '''Figure 4'''
			\|}

	For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.		For optimal performance and to prevent damage, '''always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card.''' Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.

Editor at 09:36, 18 August 2025

2025-08-18T09:36:50Z

← Older revision		Revision as of 09:36, 18 August 2025
Line 1:		Line 1:
			[[File:Easy Banner.jpg\|link=Standard_Test_Reference\|alt=Click to test Transight devices\|center\|1500x1500px]]
	== How to insert Micro-SIM card ==		== How to insert Micro-SIM card ==
	* '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 4G apart with both hands to open the device.		* '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 4G apart with both hands to open the device.

Editor at 09:44, 30 June 2025

2025-06-30T09:44:15Z

← Older revision		Revision as of 09:44, 30 June 2025
Line 2:		Line 2:
	* '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 4G apart with both hands to open the device.		* '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 4G apart with both hands to open the device.
	* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.		* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.
	* '''~~Replace~~ cover:''' Securely attach the device cover back into place.		* '''Reattach the cover:''' Securely attach the device cover back into place.

	* Your device is now ready for connection.		* Your device is now ready for connection.

Editor at 05:31, 19 June 2025

2025-06-19T05:31:46Z

← Older revision		Revision as of 05:31, 19 June 2025
Line 15:		Line 15:

	{\| class="wikitable"		{\| class="wikitable"
	! style="background-color:#800020; color:white;" \| Pin No.		! style="background-color:#800020; white-space:nowrap; color:white;" \| Pin No.
	! style="background-color:#800020; color:white;" \| Cable Color		! style="background-color:#800020; white-space:nowrap; color:white;" \| Cable Color
	! style="background-color:#800020; color:white;" \| Feature		! style="background-color:#800020; white-space:nowrap; color:white;" \| Feature
	\|-		\|-
	\|1 \|\| Red \|\| +9 to 90V		\|1 \|\| Red \|\| +9 to 90V

← Older revision		Revision as of 11:53, 14 November 2025
Line 24:		Line 24:
	\| style="vertical-align:top; width:50%;" \|		\| style="vertical-align:top; width:50%;" \|

	{\| class="wikitable"		{\| class="wikitable" style="width:100%; text-align:left;"
	! style="background-color:#800020; white-space:nowrap~~; color:white~~;" \| Pin No.		! style="background-color:#800020; color:white; white-space:nowrap;" \| Pin No.
	! style="background-color:#800020; white-space:nowrap~~; color:white~~;" \| Cable Color		! style="background-color:#800020; color:white; white-space:nowrap;" \| Cable Color
	! style="background-color:#800020; white-space:nowrap; color:white;" \| ~~Feature~~		! style="background-color:#800020; color:white; white-space:nowrap;" \| Feature
			! style="background-color:#800020; color:white; white-space:nowrap;" \| Description
	\|-		\|-
	\|1 \|\| Red \|\| +9 to 90V		\| 1 \|\| Red \|\| +9 to 90V \|\|
	\|-		\|-
	\|2 \|\| Green \|\| Ignition - Non EV		\| 2 \|\| Green \|\| Ignition - Non EV \|\| Input max 12V
	\|-		\|-
	\|3 \|\| Blue \|\| ~~Analog Input (~~AN) / ~~Digital Input (~~DI)- 2		\| 3 \|\| Blue \|\| AN / DI / DO - 2 \|\| AN Input: 0–12V<br>DI Input: 0–12V
	\|-		\|-
	\|4 \|\| White \|\| ~~Digital Output (~~DO)- 1		\| 4 \|\| White \|\| DO-1 / AN / DI / DO-3 \|\| AN Input: 0–12V<br>DI Input: 0–12V
	\|-		\|-
	\|5 \|\| Violet \|\| 1-Wire Power		\| 5 \|\| Violet \|\| 1-Wire Power \|\| Output: 5V, 30mA max
	\|-		\|-
	\|6 \|\| N/A \|\|		\| 6 \|\| N/A \|\| \|\|
	\|-		\|-
	\|7 \|\| Black \|\| Ground		\| 7 \|\| Black \|\| Ground \|\|
	\|-		\|-
	\|8 \|\| Yellow \|\| ~~Analog Input (~~AN)/ ~~Digital Input (~~DI)- 1		\| 8 \|\| Yellow \|\| AN / DI / DO - 1 \|\| AN Input: 0–12V<br>DI Input: 0–12V
	\|-		\|-
	\|9 \|\| Orange \|\| RS485 (+)		\| 9 \|\| Orange \|\| RS485 (+) \|\|
	\|-		\|-
	\|10 \|\| Pink \|\| RS485 (-)		\| 10 \|\| Pink \|\| RS485 (-) \|\|
	\|-		\|-
	\|11 \|\| Sky Blue \|\| 1-Wire Sensor Data		\| 11 \|\| Sky Blue \|\| 1-Wire Sensor Data \|\|
	\|-		\|-
	\|12 \|\| N/A \|\|		\| 12 \|\| N/A \|\| \|\|
	\|}		\|}


	\| style="vertical-align:top; text-align:center; width:50%;" \|		\| style="vertical-align:top; text-align:center; width:50%;" \|
	[[File:Discovery 4G Plus Pin-out(1).jpg\|550px]]		[[File:Discovery 4G Plus Pin-out(1).jpg\|550px]]
	\|}		\|}

← Older revision		Revision as of 05:31, 19 June 2025
Line 15:		Line 15:

	{\| class="wikitable"		{\| class="wikitable"
	! style="background-color:#800020; color:white;" \| Pin No.		! style="background-color:#800020; white-space:nowrap; color:white;" \| Pin No.
	! style="background-color:#800020; color:white;" \| Cable Color		! style="background-color:#800020; white-space:nowrap; color:white;" \| Cable Color
	! style="background-color:#800020; color:white;" \| Feature		! style="background-color:#800020; white-space:nowrap; color:white;" \| Feature
	\|-		\|-
	\|1 \|\| Red \|\| +9 to 90V		\|1 \|\| Red \|\| +9 to 90V