Initial power up of Discovery 2G Plus RS232: Difference between revisions
Created page with "== How to insert Micro-SIM card == * '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 2G apart with both hands to open the device. * '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot. * '''Replace cover:''' Securely attach the device cover back into place. * Your device is now ready for connection. For optimal performance and to prevent damage, '''always ensure the dev..." |
No edit summary |
||
| Line 1: | Line 1: | ||
== How to insert Micro-SIM card == | == How to insert Micro-SIM card == | ||
* '''Remove the cover:''' Gently push the top and bottom cases of the Discovery 2G apart with both hands to open the device. | * '''Remove the cover:''' Gently push the top and bottom cases of the '''Discovery 2G''' apart with both hands to open the device. | ||
* '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot. | * '''Insert Micro-SIM:''' Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot. | ||
* '''Replace cover:''' Securely attach the device cover back into place. | * '''Replace cover:''' Securely attach the device cover back into place. | ||
| Line 19: | Line 19: | ||
|2 | |2 | ||
|Green | |Green | ||
|Ignition | |Ignition-Non EV | ||
|3 | |3 | ||
|Blue | |Blue | ||
|Analog | |Analog In(AN) / Digital In(DI)- 2 | ||
|- | |- | ||
|4 | |4 | ||
|White | |White | ||
| | |Digiital Out (DO)- 1 | ||
|- | |- | ||
|5 | |5 | ||
| Line 35: | Line 34: | ||
|6 | |6 | ||
|Grey | |Grey | ||
| | |RS232(Tx) | ||
|- | |- | ||
|7 | |7 | ||
| Line 43: | Line 42: | ||
|8 | |8 | ||
|Yellow | |Yellow | ||
|Analog | |Analog In(AN) / Digital In(DI)- 1 | ||
|- | |- | ||
|9 | |9 | ||
|Orange | |Orange | ||
| | |Digital Out(DO) - 2 | ||
|- | |- | ||
|10 | |10 | ||
|Pink | |Pink | ||
| | |Ignition-EV | ||
|- | |- | ||
|11 | |11 | ||
| Line 59: | Line 58: | ||
|12 | |12 | ||
|Brown | |Brown | ||
| | |RS232(Rx) | ||
|} | |} | ||
==Pinout Configuration== | ==Pinout Configuration== | ||
[[File:Discovery_2G_RS232_Pin-out_page(1).jpg|left|550px]] | |||
Revision as of 17:09, 16 June 2025
How to insert Micro-SIM card
- Remove the cover: Gently push the top and bottom cases of the Discovery 2G apart with both hands to open the device.
- Insert Micro-SIM: Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.
- Replace cover: Securely attach the device cover back into place.
- Your device is now ready for connection.
For optimal performance and to prevent damage, always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card. Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.
2x6 socket pinout
| Pin no | Wire colour | Feature | |||
|---|---|---|---|---|---|
| 1 | Red | 9 to 90V | |||
| 2 | Green | Ignition-Non EV | 3 | Blue | Analog In(AN) / Digital In(DI)- 2 |
| 4 | White | Digiital Out (DO)- 1 | |||
| 5 | Violet | 1-Wire Power | |||
| 6 | Grey | RS232(Tx) | |||
| 7 | Black | Ground | |||
| 8 | Yellow | Analog In(AN) / Digital In(DI)- 1 | |||
| 9 | Orange | Digital Out(DO) - 2 | |||
| 10 | Pink | Ignition-EV | |||
| 11 | Sky Blue | 1-Wire Sensor Data | |||
| 12 | Brown | RS232(Rx) |
Pinout Configuration
.jpg)