Automotive Relay: Difference between revisions
Created page with "200px|right ==Introduction to the product== Automotive relays are the common type of electromechanical relay that are used in all types of vehicles, like car, trucks, vans and trailers. They enable a small current flow circuit to control and operate a higher current circuit in vehicular applications and can be used with various solutions and provide useful use cases. ==Configuration guide== This guide provides the configuration steps for Immobilizer re..." |
|||
| Line 69: | Line 69: | ||
! style="background-color:#800020; white-space:nowrap; color:white;" | Connection | ! style="background-color:#800020; white-space:nowrap; color:white;" | Connection | ||
|- | |- | ||
| | | 85 || <div style="color: Black; font-weight: bold;"> Black </div>|| Coil | ||
|- | |- | ||
| 86 || | | 86 || <div style="color: Red; font-weight: bold;"> Red </div> || Coil | ||
|- | |- | ||
| 87 || | | 87 || <div style="color: Green; font-weight: bold;"> Green </div> || Normally Open (NO) | ||
|- | |- | ||
| 87a || | | 87a || <div style="color: Green; font-weight: bold;"> Green </div> || Normally Closed (NC) | ||
|- | |||
| 30 || <div style="color: green; font-weight: bold;"> Green</div> || Common connection to NO & NC terminals | |||
|} | |} | ||
== Product Specification == | == Product Specification == | ||
{| class="wikitable" style="border:1px solid #ccc; width:100%;" | {| class="wikitable" style="border:1px solid #ccc; width:100%;" | ||
Latest revision as of 04:49, 12 January 2026
Introduction to the product
Automotive relays are the common type of electromechanical relay that are used in all types of vehicles, like car, trucks, vans and trailers. They enable a small current flow circuit to control and operate a higher current circuit in vehicular applications and can be used with various solutions and provide useful use cases.
Configuration guide
This guide provides the configuration steps for Immobilizer relay with Transight Telematics devices using commands.
• Command Format
SET CUIOCFG:<IO Number>-<IO Mode>-<IO Function*>
• Example
SET CUIOCFG:IO1-DO-IMB*
• Expected Response
IMEI: 862942074896945 Command: SET CUIOCFG:IO1-DO-IMB* Response: Error : 0
• Verification Command
GET CUIOCFG
• Expected Verification Response
IMEI: 862942074896945 Command: GET CUIOCFG Response: CUIOCFG: IO1-AN-GEN*IO2-DI-GEN*IO3-DO-IMB Error : 0
• Immobilizer ON/OFF Commands
SET CUIMOB:ON SET CUIMOB:OFF
• Immobilizer check Command
GET CUIMOB
• Expected Response Format
IMEI: 862942074896945 Command: GET CUIMOB Response: IMOB:OFF Error : 0
Immobilizer Scenario
The immobilizer relay operates through the Digital Output (DO) function of the Transight Telematics device. The general-purpose I/O pins are multiplexed and configurable. The pin configuration for the immobilizer is provided below.
The immobilizer will only activate when the following conditions are met at the time of sending the command:
1. Vehicle ignition is OFF, or
2. Vehicle ignition is ON and GPS fix is active, or
3. Vehicle ignition is ON and vehicle speed ≤ 10 km/h.
Wiring Information
| Relay PIN | Relay cable color | Connection |
|---|---|---|
| 85 | Black |
Coil |
| 86 | Red |
Coil |
| 87 | Green |
Normally Open (NO) |
| 87a | Green |
Normally Closed (NC) |
| 30 | Green |
Common connection to NO & NC terminals |
Product Specification
| Parameter | Value |
|---|---|
| Contact Rating | 30A/40A 14VDC |
| Coil Voltage | 12VDC |
| Coil Power | 1.8W |
| Release Voltage | ≥10% |
| Pickup Voltage | ≤70% |
| Insulation Resistance | 100Ω |
| Contact Resistance | 100Ω |
| Between open contact | 500VAC |
| Between coil & contact | 750VAC |
| Temperature Range | -55~+85℃ |
| Dimension | 25.0x27.4x28.4 |
| Weight | 40g |
| Supported by | DISCOVERY-116A, DISCOVERY-126A, DISCOVERY-206A, DISCOVERY-226A, DISCOVERY-296A, |