EUROSENSE DOMINATOR: Difference between revisions
No edit summary |
No edit summary |
||
| Line 61: | Line 61: | ||
|- | |- | ||
| Green || RS485 B | | Green || RS485 B | ||
|} | |} | ||
===Product Link=== | ===Product Link=== | ||
[[https://eurosenstelematics.com/ Purchase Link]] | [[https://eurosenstelematics.com/ Purchase Link]] | ||
Revision as of 12:16, 24 June 2025
Introduction to the Product
Eurosens sensors are designed to measure fuel level in tanks of vehicles and stationary units. The sensors are used in fleet management systems to monitor real fuel consumption, discharges, and refuelling. Sensors can measure POL (gasoline, kerosene, oil), which freely move inside measuring electrodes.
Product Specification
| Parameter | Value |
|---|---|
| Measurement range, mm | 20–1500 (with single electrode) / 20–10000 (with composite electrodes) |
| Power supply, V | 10–50 |
| Reverse polarity protection | Yes |
| Measurement error | ±1% |
| Data averaging period, sec | 1–300 |
| Max current consumption at 12 V, mA | ≤ 50 |
| Max current consumption at 24 V, mA | ≤ 25 |
| Ambient operating temperature, °C | -40 to +85 |
| Electromagnetic compatibility | UNECE Regulation №10 (05), TR CU 020 |
| Galvanic isolation of measuring electrodes from external circuits | Up to 1500 V |
| Ingress protection rating | IP67 |
| Cable length | 7m (other lengths available on request) |
| Tank calibration in sensor memory | Supported |
| Explosion proof certificate | 0ExiiaIIBT6 X |
| Built-in power battery | ER14505H, 3.6 V |
| Internal battery life, years | 5 |
| Measurement error | ±1% |
| Data averaging period, sec | 4, 8, 16, 32, 64, 128 |
| Data sending interval, sec | 2–1800 |
Wiring Information
| Wire Colour | Function |
|---|---|
| Red | Power |
| Brown | GND |
| Yellow | RS485 A |
| Green | RS485 B |