Installation FAQ: Difference between revisions
| Line 147: | Line 147: | ||
Yes: | Yes: | ||
• BLE 4.2 | • BLE 4.2 | ||
• Cellular: 2G / 4G LTE Cat 1 | • Cellular: 2G / 4G LTE Cat 1 | ||
<br>[[#Questions|Back to Questions]] | <br>[[#Questions|Back to Questions]] | ||
==== <span id="q14">What types of GNSS systems are supported?</span> ==== | ==== <span id="q14">What types of GNSS systems are supported?</span> ==== | ||
Revision as of 06:13, 17 November 2025
Installation & Hardware FAQs
Questions
Answers
How should I mount the device in the vehicle or asset?
Transight devices support multiple mounting options such as:
• Adhesive pads
• Zip ties
Back to Questions
Are the devices water and dust resistant?
Yes. Entry-level trackers are IP54-rated, while rugged models offer IP67 protection.
Back to Questions
How do I know if the device is powered on and connected?
Check the LED indicators:
• Power
• GSM/Network
• GPS
Each LED gives visual feedback on device status.
Back to Questions
Does the device support firmware updates over the air (FOTA)?
Yes. Most devices support FOTA and COTA using GPRS/SMS or the cloud platform.
Back to Questions
Is internet access required during installation?
Yes. Internet is required to verify server connectivity and test protocol communication (e.g., TCP, HTTP, or SMS).
Back to Questions
How do I verify GPS/GNSS functionality during setup?
Ensure:
• Clear view of the sky
• Outdoor environment
Devices use GPS, GLONASS, NavIC, etc., and offer <2.5m CEP accuracy in ideal conditions.
Back to Questions
Can the device be installed on electric vehicles (EVs)?
Yes. Advanced models support wide voltage and low power usage, ideal for EVs.
Back to Questions
What should I do if the device doesn’t come online after installation?
Troubleshooting steps:
• Check power and connections
• Verify SIM/APN settings
• Ensure network signal
• Reboot device
• Observe LEDs
• Contact Transight support if unresolved
Back to Questions
What type of battery is used in Transight devices?
• Most: 3.7V Li-Po, 350mAh–1000mAh
• AC Datalogger: 6500mAh Li-ion (up to 200 days)
Back to Questions
What are the dimensions and weight of the devices?
• Discovery 4G: 70 × 60 × 23 mm
Back to Questions
What types of sensors are built into the devices?
• 3D/6D Accelerometer
• Gyroscope
• Temperature & Humidity (in some models like AC Datalogger)
Back to Questions
What kind of inputs/outputs are supported?
Varies by model:
• Digital Inputs: Up to 3
• Digital Outputs: Up to 3
• Analog Inputs: Up to 3
• 1-Wire, RS232, RS485, CAN 2.0B, I2C supported in select models
Back to Questions
Do the devices support wireless interfaces?
Yes:
• BLE 4.2
• Cellular: 2G / 4G LTE Cat 1
Back to Questions
What types of GNSS systems are supported?
Supports:
• GPS
• GLONASS
• NavIC
• Galileo
• QZSS
• Assisted GNSS for improved startup
Back to Questions
Are hardware protections included?
Yes:
• Over-current & short-circuit
• ESD protection
• Thermal protection in advanced models
Back to Questions
What type of antennas are used?
• Internal: GSM, GPS, BLE
• External: Used in datalogger models (GNSS/GPRS)
Back to Questions
Is hardware tamper protection available?
Yes. Features include:
• Tamper detection alerts
• RTC-based tamper logs
Back to Questions