STRELA FUEL SENSOR: Difference between revisions
Created page with " == Introduction to the Product == The '''Strela Fuel Level Sensor''' (FLS) with RS232/RS485 output interface is designed for measuring fuel and lubricant (POL) levels. It is suitable for use in vehicles and fuel depots as part of fuel monitoring and control systems. FLS can measure fuels such as gasoline, diesel, and oil. It determines fuel levels, converts them into volume (if recalibration tables are unavailable, output is proportional to level), and transmits data..." |
No edit summary |
||
| Line 7: | Line 7: | ||
== Product Specification == | == Product Specification == | ||
{| class="wikitable" style=" | {| class="wikitable" | ||
| | ! style="background-color:#800020; white-space:nowrap; color:white;" | Parameter | ||
! | ! style="background-color:#800020; white-space:nowrap; color:white;" | Value | ||
|- | |- | ||
| Power supply voltage || 10 – 30 V | | Power supply voltage || 10 – 30 V | ||
| Line 39: | Line 39: | ||
{| class="wikitable" style="width:50%;" | {| class="wikitable" style="width:50%;" | ||
| | ! style="background-color:#800020; white-space:nowrap; color:white;" | Wire Color | ||
! style="background-color:#800020; white-space:nowrap; color:white;" | Function | |||
|- | |- | ||
| Red || Power | | Red || Power | ||
Revision as of 10:24, 21 June 2025
Introduction to the Product
The Strela Fuel Level Sensor (FLS) with RS232/RS485 output interface is designed for measuring fuel and lubricant (POL) levels. It is suitable for use in vehicles and fuel depots as part of fuel monitoring and control systems.
FLS can measure fuels such as gasoline, diesel, and oil. It determines fuel levels, converts them into volume (if recalibration tables are unavailable, output is proportional to level), and transmits data over RS-232/RS-485 using the Modbus or Omnicomm protocol. The sensor is compatible with display units or programmable controllers that match its electrical signal specifications.
Product Specification
| Parameter | Value |
|---|---|
| Power supply voltage | 10 – 30 V |
| Consumption current | 20 mA |
| Communications protocol | Modbus, Omnicomm |
| Default data transmission rate | 19200 bit/sec |
| Supported data rates | 9600, 14440, 19200, 38400, 57600, 115200 bit/sec |
| Low limit fuel level from bottom | From 20 mm |
| High limit measuring range | 200 – 4000 mm |
| Measurement error | ±1% of sensor length |
| Dimensions | L × 70 × 70 mm |
| Operating temperature range | -40°C to +70°C |
| Relative humidity at ≤ +40°C | ≤ 95% |
| Operating life | Unlimited |
Wiring Information
| Wire Color | Function |
|---|---|
| Red | Power |
| Brown | Ground |
| Green | Rx |
| Yellow | Tx |
Communication Notes
- Data communication is available through both RS232 and RS485 interfaces.
- The sensor supports Modbus and Omnicomm protocols for integration into various telemetry and automation systems.
- Output value is proportional to fuel level unless specific recalibration tables are applied.