Initial power up of Discovery 2G Plus RS232

How to insert Micro-SIM card

• Remove the cover: Gently push the top and bottom cases of the Discovery 2G apart with both hands to open the device.
• Insert Micro-SIM: Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.
• Replace cover: Securely attach the device cover back into place.

• Your device is now ready for connection.

For optimal performance and to prevent damage, always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card. Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.

2x6 socket pinout

Device Pin Configuration

Pin no	Wire colour	Feature
1	Red	9 to 90V
2	Green	Ignition-Non EV	3	Blue	Analog In(AN) / Digital In(DI)- 2
4	White	Digiital Out (DO)- 1
5	Violet	1-Wire Power
6	Grey	RS232(Tx)
7	Black	Ground
8	Yellow	Analog In(AN) / Digital In(DI)- 1
9	Orange	Digital Out(DO) - 2
10	Pink	Ignition-EV
11	Sky Blue	1-Wire Sensor Data
12	Brown	RS232(Rx)

Pinout Configuration