BLE Configuration app

BLE Configuration App – User Guide

1. First Setup

• Open the BLE Configuration App.
• Create a user account by entering a username and password.
• Log in using the created credentials.
• From the list of nearby available devices, select your device.
• Click on the device name and enter the password to customize your device.
  • Default password: Transight
• Go to Device Details → Security Window to change the device name and password.

2. Configuration

• Navigate to Create Custom Configuration and input the required details:
  • APN Settings
    • Set the appropriate APN for your SIM/network provider.
  • Server Settings
    • Set the Server IP or URL.
  • Data Update Rate
    • Set the update rate for both IGN ON and IGN OFF conditions.
  • Serial Data Configuration (Fuel Sensor)
    • Select the Fuel Sensor Model
    • Choose the Mode of the sensor
    • Select the Data Format
    • Set the Update Interval for fuel data
  • 1-Wire Sensors Configuration
    • Enable 1-Wire Communication
    • Select the appropriate Sensor Model
  • Deep Sleep Option
    • Enable this feature to activate deep sleep mode when the vehicle is halted

• Save the configuration with a custom name.
• Go to Change Configuration and apply the saved configuration to the device.

3. Security Features

• Factory Reset: Use this to delete all existing configurations from the device.
• Device Restart: After applying a configuration, restart the device for changes to take effect.
• OEM Troubleshooting: Enable this to allow remote configuration or troubleshooting by Transight.

4. Firmware Update

• You can update the device firmware directly through the Configuration App.

5. Device Status

• Tap on Device Status to view real-time information on:
  • Device Connectivity
  • GNSS (GPS) Status
  • GSM Signal
  • I/O Changes