ITALON FUEL SENSOR
Introduction to the Product
ITALON Fuel Level Sensors (FLS) measure fuel level in fuel tanks of the vehicles and stationary objects. ITALON FLS are connected to GPS devices which in turn transfer all the data along with the fuel information to a server part of the solution.
| Parameter | Value |
|---|---|
| Error in measurement | ± 0.5% |
| Interface | RS-485 |
| Power supply voltage | 7…40V |
| Insulation breakdown protection | 2500V |
| Operating temperature | -40…+85°C |
| Measurement range of digital interface | 0…4095 |
Wiring Information
| Wire Colour | Function |
|---|---|
| Brown | Power |
| White | GND |
| Orange | RS485A |
| Blue | RS485B |
Device Configuration
- Connect the sensor to the device using the RS-485 ports.
- Open the configurator tool DUTconf.exe to verify the sensor’s operational status.
- Use the QCOM tool to confirm that the fuel data is being displayed.
- Ensure the necessary parameters are correctly configured on the device for the connected fuel sensor.
For Active Mode, use the following command:
SET CUENSDA:ON,CUSRLSRC:SRLGEN,CUSRLDATACFG:1-0-0-0-0-0-0-0-0