Remove the cover: Gently push the top and bottom cases of the Discovery 4G apart with both hands to open the device.
Insert Micro-SIM: Place the Micro-SIM card into the SIM holder, ensuring the cut-off corner faces away from the slot.
Reattach the cover: Securely attach the device cover back into place.
Your device is now ready for connection.
Figure 1
Figure 2
Figure 3
Figure 4
For optimal performance and to prevent damage, always ensure the device is fully powered off—with both external power and the internal battery disconnected—before inserting or removing the Micro-SIM card. Failure to do so could result in a damaged Micro-SIM card or the device failing to detect it.
Internal Battery Disconnection Procedure To disconnect the internal battery, remove the device enclosure carefully and separate the PCB from the casing. The internal battery is connected to the PCB using a 2-pin connector. Gently unplug the connector from the port. After inserting or replacing the SIM card, reconnect the 2-pin connector securely before reassembling the enclosure.
2x6 socket pinout
Pin No.
Cable Color
Feature
Description
1
Red
9 to 90V
2
Green
Ignition
Input Max 12V
3
Blue
Analog Input (AN) / Digital Input (DI) / Digital Output (DO) - 2
AN Input: 0–12V DI Input: 0–12V
4
White
Analog Input (AN) / Digital Input (DI) / Digital Output (DO) - 2
AN Input: 0–12V DI Input: 0–12V
5
Violet
1-Wire Power
Output 5V 30mA Max
6
Grey
CAN(H)
CAN High Pin
7
Black
Ground
8
Yellow
Analog Input (AN) / Digital Input (DI) / Digital Output (DO) - 2
.jpg)